Grade I antibacterial, strong covering power. Jingchan moisture-proof and mildew-proof wall paint is an economical interior wall paint with a clean odor formula. It is low in odor and more environmentally friendly. It also has Class I antibacterial* function, which can resist the growth of various bacteria; and adds mildew-proof* factors, which can effectively prevent the formation of mildew spots. In addition, the product also has practical properties such as strong hiding power, good alkali resistance, easy construction, and Class A flame retardant*. It is suitable for decorating and protecting indoor base walls. It is an ideal choice for wall painting in homes and public spaces such as hospitals, nursing homes, and kindergartens. *The product meets the Class I performance requirements of the standard GB/T 21866 "Determination of antibacterial properties and antibacterial effects of antibacterial coatings (paint films)", and the antibacterial rate against Staphylococcus aureus, Escherichia coli (i.e. Escherichia coli), and Klebsiella pneumoniae is >99.99%. **The product meets the GB/T 1741 "Determination of mildew resistance of paint films" and HG/T The 3950 "Antibacterial Coatings" standard requires that after 56 days of culture testing (twice the 28 days required by the standard), the growth level of 11 types of molds, including Aspergillus niger, Aureobasidium short-stalked, and Aspergillus flavus, is 0. ***A-level flame retardancy: According to the technical indicators of flat building materials and products in the GB 8624 "Classification of Combustion Performance of Building Materials and Products" standard and the external secondary components of non-homogeneous products, the combustion level results meet the technical requirements of A (A2) level non-combustible materials.
Weight/Dimensions:20 kg Adjustable color: white Gloss: Matte Coating rate Theoretically, this can of moisture and mildew proof wall paint is enough to cover an area of 170 square meters. The actual area to be covered will vary depending on the construction method and the degree of surface roughness. Drying time Usually two coats are required, and under normal circumstances, each coat should be dried at least 2 hours apart. Number of coating layers: 2 Product Features I-level antibacterial Environmentally friendly and odorless Double mildew resistance Strong covering power A-level flame retardant Tips and suggestions
Surface preparation
1. Paint can be applied by brush or roller. Usually two coats are required, and each coat should be dried at least 2 hours apart under normal circumstances. 2. No dilution is required. If dilution is necessary, no more than 5% (volume ratio) of clean water can be added. Do not over-dilute, otherwise it will cause powdering. Stir thoroughly before construction;
Cleaning
The used tools should be cleaned immediately with soap and warm water. It is not allowed to reuse tools that have been in contact with different models and different performance coatings. If necessary, the residue should be cleaned and thoroughly washed before use. Do not apply when the base temperature is lower than 10℃ or the ambient humidity is greater than 85%. During wall maintenance and daily use, if there is a large temperature difference and high humidity weather in the south (such as the return of the south, plum rain days, etc.), it is recommended to close the doors and windows in time and turn on the dehumidification equipment.
