Name: Super wear resistant epoxy bead flat coating
Brand: Hongtu Coatings
Availability: InStock
Rating: 5 (1 reviews)

Description

PRODUCT APPLICATION
This product is used in factories, warehouses, etc., where high wear resistance is required.

CHARACTERISTIC
This product has: excellent wear resistance, environmental protection, almost odorless, low viscosity, flow spread
And the characteristics of good leveling and high strength.

SPECIFICATIONS
Mixing: Pour components A and B into the mixing barrel in proportion and stir evenly (electric: when stirring the stirring time should not be less than 1 minute, manual: the stirring time should not be less than 2 minutes, pay attention to the layer between the upper and lower liquid levels
mix between).
Construction method: Construction can be carried out directly on the base surface after the intermediate coating has been applied. Roller coating or troweling can be used.
The knife is applied directly.
Dosage and film thickness: 0.12-0.15kg/m’ (roller coating), 0.30-0.40kg/m’ (1mm trowel)
Construction conditions: relative air humidity below 80%, rainy days or relative humidity above 85%.Construction should be avoided when the temperature is below 5°C.
store Storage: Sealed and stored in a cool and ventilated place, protected from fire, moisture and sun.

TECHNICALINDICATORS

project	Component A	Component B
Use time	60min (10℃)	40min (25℃)	20min (35℃)
tack free	8h (10℃)	4h (25℃)	3h (35℃)
Practical time	18h (10℃)	12h (25℃)	8h (35℃)
proportion	1.45	1.05
colour	of all kinds	Transparent and colorless
proportion	Component A/Component B =4:1
solid content	More than 90% (after mixing)

Super wear resistant epoxy bead flat coating

Description

Download